LIGHTWEIGHT COMPOSITE WALL SYSTEM MANUFACTURING.


Description

The Lightweight Composite system is a sandwich wall panel are lightweight solid core sandwich panels made of 5mm non-asbestos fiber cement/ Calcium silicate boards on both sides of panels as facing sheet and the core material of expanded polystyrene beads (which can also be replaced by Pumice so as to avoid issues relating with foreign currency shortage), admixture, cement, sand, fly ash and other bonding materials in mortar form. The core material in slurry state is pushed under pressure into preset molds. Once set, it is moved for curing and ready for use with RCC or steel framed structure. These panels may be installed without any structural support up to 5m only. Due to the sheets, the panels do not require plastering and water curing. These panels are joined with tongue & groove jointing system.

Machines To Be Procured

Full set of Machines

Raw Materials

EPS Cement Mix: Cement, Sand, Expanded Polystyrene (Polystyrene granule), Fly ash, Water, Additives;

Cement / Calcium Silicate Board: Cement, Fly ash (180um stone powder or Quartz sand), paper pulp, fiber glass and water.


img